Saqib Farooq

EXPERIENCE                                                  

Bilgrami & Faruque                                                                                            Karachi, Pakistan

Senior Engineer                                                                                                            2017-Present

• Aisha Steel Cold Rolled Mills Ground Floor, pre-fabricated at Port Qasim Karachi.

Designed foundations for the pre-fabricated steel structure using given loads for seismic design, gravity and wind loads using Etabs for analyzing and Safe for foundation design. 

Involved in the preparation of construction drawings and inspection of reinforcement details at the field. Coordinated with the contractors on the requirements and technical matters.

• UDL Warehouse (B+G+4) on Pile foundations, Korangi Karachi. Analyzed and designed RCC structure using Etabs and Safe for pile foundations. Involved in the preparation of construction drawing, prepared design calculations report, and involved in the vetting with the Proof Engineer.
• Office Building (B+G+4) DHA Karachi. Analyzed and designed RCC structure using Etabs and Safe for raft foundation. Involved in the preparation of construction drawings and partnered with the vendor in designing slabs in post tension. Prepared design calculations report and involved in the vetting with the Proof Engineer.   

Projects

Hassan Nawaz Office Building (B+G+4) DHA Karachi 

Zain Mundia Office Building (B+G+4) DHA Karachi

Naveed Shakoor Office Building (B+G+4) DHA Karachi

Naveed Shakoor Office Building (B+G+5) DHA Karachi

With Resturant on Roof, Khy Buhkari

Naveed Shakoor Office Building (B+G+5) DHA Karachi

With Resturant on Roof, Khy Shabaz, for Vettting

Flour Mill Building, (G+5), Karachi

Green Shield School Seminar Hall Ground Floor, North Karachi

Green Shield School for Special Children (G+4), North Karachi

Various Residential Bunglows, B+ G+1, G+1, B+G+2

Bilgrami & Faruque                                                                                            Karachi, Pakistan

Assistant Engineer                                                                                                            2009-2016

• Labour Staff Building G +3, Al Rahim Textile, Nooriabad, Karachi. Analyzed and designed this building using Etabs and Safe for Raft design. Involved in preparing construction drawings and design calculation reports.
• UEP Base Camp Mirpurkas Office Building, Kitchen Area, Mosque, Generator Foundation, Power house, Recreation Centre and Gymnasium. Analyzed and designed office building with requirements of flat slab using Etabs and shallow foundations using Safe. Designed generator foundation and coordinated with outsource engineer to check the viability of the steel structure of the power house.
• Race course Apartments, Rawalpindi (B+G+7), 5 Towers. Conducted seismic analysis and designed the RCC for a 9 story apartment building using Etabs and Safe for Raft design. Involved in the preparation of construction drawings and prepared design calculation reports.

Projects

Mount Fuji Textile (G+3) Office Building Site Area Karachi

Mount Fuji Textile (G+3) Ware House Site Area Karachi

Mount Fuji Textile (G+5) Garments Stitching Building Site Area Karachi

Younis Textile Mill #1, Office building #1, G+3

Younis Textile Mill #1, Underground Tank, 100ft x 75ft x 22f

Younis Textile Mill #3, Mosque, GF

Fay Tissue Godown, G+3 

MCASW Office Building (B+G+4) DHA, Karachi

Green Shield School (G+4), 3 Blocks, North Karachi

Various Residential Bunglows, B+ G+1, G+1, G+2     

Bilgrami & Faruque                                                                                            Karachi, Pakistan

Junior Engineer                                                                                                                 2003-2008

• Hamsons, Garment Factory, B+G+3. Analyzed the project by manually calculating the gravity loads and designed by using built in software and excel sheets. Involved in preparation of construction drawings and inspection of the reinforcement details at site at each stage of the project.
• Syncotex, Garment Factory, B+G+3. Analyzed the project by manually calculating the gravity loads and designed by using built in software and excel sheets. Involved in preparation of construction drawings and inspection of the reinforcement details at site at each stage of the project.

Projects

• J & M, Garment Factory, B+G+3
• PQ Chemical Industry, Security Office Building, G+2
• LRBT Eye Hospital, G+1 in Sargodha 
• Lucky Mill No 4, B+ G +3  Main Building
• Lucky Mill No 4, B+ G +3 
• Lucky Cement, Generator Foundation of 4 MW
• Bank Al-Habib, B+G+4
• Masoomeen Hospital B+G+6       

Senior Engineer                                                                                                            2017-Present

• Aisha Steel Cold Rolled Mills Ground Floor, pre-fabricated at Port Qasim Karachi.

Designed foundations for the pre-fabricated steel structure using given loads for seismic design, gravity and wind loads using Etabs for analyzing and Safe for foundation design. 

Involved in the preparation of construction drawings and inspection of reinforcement details at the field. Coordinated with the contractors on the requirements and technical matters.

• UDL Warehouse (B+G+4) on Pile foundations, Korangi Karachi. Analyzed and designed RCC structure using Etabs and Safe for pile foundations. Involved in the preparation of construction drawing, prepared design calculations report, and involved in the vetting with the Proof Engineer.
• Office Building (B+G+4) DHA Karachi. Analyzed and designed RCC structure using Etabs and Safe for raft foundation. Involved in the preparation of construction drawings and partnered with the vendor in designing slabs in post tension. Prepared design calculations report and involved in the vetting with the Proof Engineer.   

Projects

Hassan Nawaz Office Building (B+G+4) DHA Karachi 

Zain Mundia Office Building (B+G+4) DHA Karachi

Naveed Shakoor Office Building (B+G+4) DHA Karachi

Naveed Shakoor Office Building (B+G+5) DHA Karachi

With Resturant on Roof, Khy Buhkari

Naveed Shakoor Office Building (B+G+5) DHA Karachi

With Resturant on Roof, Khy Shabaz, for Vettting

Flour Mill Building, (G+5), Karachi

Green Shield School Seminar Hall Ground Floor, North Karachi

Green Shield School for Special Children (G+4), North Karachi

Various Residential Bunglows, B+ G+1, G+1, B+G+2

Bilgrami & Faruque                                                                                            Karachi, Pakistan

Assistant Engineer                                                                                                            2009-2016

• Labour Staff Building G +3, Al Rahim Textile, Nooriabad, Karachi. Analyzed and designed this building using Etabs and Safe for Raft design. Involved in preparing construction drawings and design calculation reports.
• UEP Base Camp Mirpurkas Office Building, Kitchen Area, Mosque, Generator Foundation, Power house, Recreation Centre and Gymnasium. Analyzed and designed office building with requirements of flat slab using Etabs and shallow foundations using Safe. Designed generator foundation and coordinated with outsource engineer to check the viability of the steel structure of the power house.
• Race course Apartments, Rawalpindi (B+G+7), 5 Towers. Conducted seismic analysis and designed the RCC for a 9 story apartment building using Etabs and Safe for Raft design. Involved in the preparation of construction drawings and prepared design calculation reports.

Projects

Mount Fuji Textile (G+3) Office Building Site Area Karachi

Mount Fuji Textile (G+3) Ware House Site Area Karachi

Mount Fuji Textile (G+5) Garments Stitching Building Site Area Karachi

Younis Textile Mill #1, Office building #1, G+3

Younis Textile Mill #1, Underground Tank, 100ft x 75ft x 22f

Younis Textile Mill #3, Mosque, GF

Fay Tissue Godown, G+3 

MCASW Office Building (B+G+4) DHA, Karachi

Green Shield School (G+4), 3 Blocks, North Karachi

Various Residential Bunglows, B+ G+1, G+1, G+2     

Bilgrami & Faruque                                                                                            Karachi, Pakistan

Junior Engineer                                                                                                                 2003-2008

• Hamsons, Garment Factory, B+G+3. Analyzed the project by manually calculating the gravity loads and designed by using built in software and excel sheets. Involved in preparation of construction drawings and inspection of the reinforcement details at site at each stage of the project.
• Syncotex, Garment Factory, B+G+3. Analyzed the project by manually calculating the gravity loads and designed by using built in software and excel sheets. Involved in preparation of construction drawings and inspection of the reinforcement details at site at each stage of the project.

Projects

• J & M, Garment Factory, B+G+3
• PQ Chemical Industry, Security Office Building, G+2
• LRBT Eye Hospital, G+1 in Sargodha 
• Lucky Mill No 4, B+ G +3  Main Building
• Lucky Mill No 4, B+ G +3 
• Lucky Cement, Generator Foundation of 4 MW
• Bank Al-Habib, B+G+4
• Masoomeen Hospital B+G+6       

NED University of Engineering and Technology, Karachi

ME Environmental Engineering - 2005